Product introduction:
Polyvinylidene fluoride (PVDF) hollow fiber prepared by phase inversion method ultrafiltration membrane It has excellent chemical stability and mechanical strength, with a molecular weight of 00015.00000Da. It has good retention effect on macromolecular substances (proteins, various types, nucleic acids, polysaccharide particles (latex, microparticles), bacteria, etc. In view of the problem that PVDF membrane has strong water property and is easy to be polluted, the amphiphilic polymer modifier of our company's main intellectual property right is used for hydrophilic modification to prepare the hydrophilic PVDF hollow fiber ultrafiltration desert with high flux and anti pollution.
Product features:
1. High water flux and good permeability
2. Higher suspended solids content and larger particle diameter of influent are allowed
3. High filtering precision and excellent interception performance
4. Hydrophilic modification of independent intellectual property with strong hydrophilicity
5. Excellent anti pollution performance
6. High mechanical strength, the tensile force of a single homogeneous membrane can reach 280~300g
Main applications:
1. RO pretreatment and post-treatment
2. Impurity removal, bacteria filtration and concentration in food, pharmaceutical and fermentation industries
3. Reclaimed water reuse
4. Drinking water supply treatment
Model | Module model
| Cp0440a
| Cpo660a
| CP0860c
| Cp1060a
|
Specifications SPECIFICATON | Filtering form
| External pressure
|
Membrane material
| PVDE
|
Inside/outside diameter
| 0.8/1.2mm
|
Bonding material
| epoxy
|
Shell material
| ABS
| UPVC
|
aperture
| 0.03um
|
Membrane area
| 8m2
| 30m2
| 46m2
| 70m2
|
Effective length
| 940
| 1400
| 1400
| 1400
|
Number of membrane filaments
| 2200
| 5600
| 8600
| thirteen thousand and two hundred |
| Interface size
| DN25
| DN4O
| DN50 copy forest
| DN5O copy forest
|
Weight (warm state)
| 7kg
| 50kg
| 70kg
| 90kg
|
performance PROPERTIES | Initial flux of pure water
| 1.5m3/h
| 6m3/h
| 9m3/h
| 13m3/h
|
Effluent turbidity
| ≤0.1UTN
|
Effluent suspended solids
| <0.5ma/L
|
Water producing Escherichia coli
| Not detected
|
| Maximum water inlet pressure
| 0.6Mpa
|
Maximum transmembrane pressure difference
| 0. 2Mpa
|
Maximum residual chlorine resistance
| 500mg/L short time |
Service conditions WORKINGCONDITIONS | Maximum inlet residual chlorine
| 500ma/L
|
Maximum inlet turbidity
| 3OONTU
|
Operating temperature
| 5-40°C
|
PH value tolerance range
| 2-11
|
Design working pressure
| 0.05-0.10Mpa
|
Operation mode
| Dead end filtration or cross flow filtration
|
| Backwashing pressure 0.10-020Mpa
|
|
|
|
|
Backwashing flow
| 0.51.2m3/h
| 2.454m3/h
| 3.2-72m3/h
| 5.2-11.7m3/h
|
Backwashing cycle
| 20-60min
|
Backwashing time
| 60-120s |
Cleaning conditions CLEANINGCONDITIONS | Chemical dispersion cleaning frequency
| 1-2d (each time) or chemical dispersion cleaning is not set according to the inlet water quality
|
Chemical separation and full washing room/solution concentration
| 10-20min/sodium hypochlorite 200-500mg/L
|
Chemical cleaning frequency
| 2-4 months (each time)
|
When medicine is fully washed/concentration of medicine solution
| 4-6 h (each time)/sodium hypochlorite 1000-2000mg/L, citric acid 2000-4000mg/L
|
Air washing flow
| 0.9-2.1Nm3/h
| 4.59Nm3/h
| 5-12Nm3/h
| 10-20Nrm3/h
|
Note: The above data are for reference only, and the test conditions are: 25 ℃, 0.1Mpa. The cleaning shall be carried out before the ultrafiltration membrane causes serious pollution, so that the membrane flux can be easily restored to the initial state. The cleaning interval is generally based on the on-site raw water test.
Zhejiang Jiefu Environmental Protection Technology Co., Ltd. is a professional manufacturer Water purification filter element , separation, purification materials and product research and development, manufacturing, engineering applications and marketing of high-tech companies. Since its establishment, it has always focused on the R&D and promotion of a variety of new filtration and separation materials and products, polymer separation membrane materials and equipment. It has been widely used in wastewater treatment and reuse, water quality purification, solution concentration, extraction and recovery, liquid degassing and other fields, meeting the user's multiple needs for water filtration and phase separation. Welcome to call: 0573-88222777